Renault Captur Forums banner

Possible workshop manual found

8.4K views 16 replies 8 participants last post by  glimp  
#1 · (Edited)
Finally Haynes produce a manual

This may help some, from the link choose your model or tyre in the reg number

 
#3 ·
Haynes appeared to "downgrade" their workshop manuals to "user guides" or similar. The Captur one is coming up as "diagnostics and service" and online only (no paper "proper" manual). It seems that long gone are the days when they would buy a car and strip it down in order to write a manual about it
 
#6 ·
Evening All,

I might be the one to bite the bullet and try this. Much like others have said, I would have preferred a hard (paper) copy, and have used just such Haynes manuals in the past to literally strip and rebuild several of my motorcycles.

They certainly got "lighter" as years have passed, but if this version contains most of what I'd expect/want, then £26 isn't too bad, as that's about half an hour's labour in an Indy garage, or about 5 seconds in a Renault main dealers! 🤪

Interestingly there is a 0.9TCE version available (based on my registration).

Scott
 
#10 ·
Evening All,

I might be the one to bite the bullet and try this. Much like others have said, I would have preferred a hard (paper) copy, and have used just such Haynes manuals in the past to literally strip and rebuild several of my motorcycles.

They certainly got "lighter" as years have passed, but if this version contains most of what I'd expect/want, then £26 isn't too bad, as that's about half an hour's labour in an Indy garage, or about 5 seconds in a Renault main dealers! 🤪

Interestingly there is a 0.9TCE version available (based on my registration).
workshop manual PDF
Scott
Finally, Haynes has released a manual. You can now choose your B-Max model or enter your registration number on their site to get the right version. This should help a lot of owners looking for proper guidance.
 
#8 ·
I have since been doing a little bit of reading around the Haynes AutoFix stuff. Interestingly, even Haynes themselves say it isn't a manual,

"Haynes AutoFix is not a Haynes Manual. We want to be very clear about this..."

and all the reviews I have read are from disgruntled purchasers suggesting it was a total waste of ÂŁ26. The information isn't particularly vehicle or model specific, so the reviewers say, so I don't think I shall be bothering. Shame, as had it been a "proper" Haynes manual, I would have bought it without question.

Furthermore, to access most of what AutoFix has to offer you need an OBD reader. I have one, but if you didn't, that would be another additional cost. Once I can access the fault code, a quick Google search tends to do the rest, so I'm not sure quite what else AutoFix can offer to justify the price.

As such, I highly doubt I will be "that" person to bite the bullet and try this.

Scott
 
#11 ·
Hi Veverag,

That is useful to know. I have used the old fashioned, paper, Haynes manuals when working on my motorcycles over many years.

I note the new manuals are "online only", which for me, detracts massively, as I like to have the book open in front of me when doing the job, but yes, I am sure it will have some value to some Captur owners.

Scott
 
This post has been deleted
#15 ·
That link is to a website that looks genuine and states that they have the right to sell the downloads but there is no contact information visible at all. (I cannot see a link to a Captur manual). Caveat emptor